download
I have seat covers on my Prius, which has a flap that extends under the back of the seat to attach with a Velcro strap. This crowds the CAN-View box if it is placed on top of the Nav box, as suggested in the installation instructions, as shown in the following: So I decided to put the CAN-View box in front of the Nav box, attached with Velcro (just the prickly part) to the rug. This shows the seat leaned back to give room to get to the plugs on the Nav box and more room to install the OBD cable under the dash. This shows how easy it is now, with the seat leaned back, to get to the cables in front of the Nav box. The gray wire on the large white plug to be tapped is just below the blue wire. It can be pulled away from the other wires just enough to attach the tap. The small white plug to the left of the large white plug is the one that is to be removed to plug into the CAN-View box. (This is the MFD connection to the Nav box which will become the MFD connection to the CAN-View.) Then the small white plug on the other CAN-View cable is to be plugged into the Nav plug that was unplugged from the Nav box. (The MFD connection is channeled through the CAN-View and then back out to the Nav box.)